Linkage
Linkage |
1. |
Lift up the main fuse box.
|
2. |
Engage 4th gear.
|
3. |
Lock 4th gear in the gearbox with
87 92 335 Locking pin
.
|
4. |
Undo the linkage bracket on the engine mounting.
|
5. |
Detach the pinch-bolt clamp from the selector rod.
|
6. |
Detach the connection from the gearbox
|
7. |
Remove the linkage.
|
Fitting in-car |
1. |
Fit the linkage to the gearbox and selector mechanism but do not tighten.
|
2. |
Screw the linkage bracket to the engine mounting.
Tightening torque: 22 Nm (16 lbf ft). |
3. |
Engage 4th gear.
|
4. |
Lock 4th gear in the car with
87 92 632 Locking pin
|
5. |
Tighten the connection to the gearbox.
|
6. |
Tighten the pinch-bolt clamp to the selector rod.
Tightening torque: 22 Nm (16 lbf ft). |
7. |
Pull out the locking pin.
|
8. |
Insert the plastic plug.
|
9. |
Extract the locking pin from the gear lever housing.
|
10. |
Fit the main fuse box.
|
11. |
Check that all gears can be engaged and that the key can be removed in reverse.
|