Bearing by 1st gear pinion on the input shaft
Bearing by 1st gear pinion on the input shaft |
To remove |
1. |
Mount the shaft in a press with
87 91 121 Puller ring
or
87 92 830 Puller ring, 12-teeth manual gearbox
and
87 90 636 Fixture
.
|
2. |
Press the bearing off the shaft.
|
To fit |
1. |
Fit a new bearing. Be sure to turn the bearing in the correct direction. Press the bearing to the stop with the sleeve from
87 91 261 Puller, pinion
.
|