C1540
Read the instructions below then
start the fault diagnostic procedure.
Symptom: ABS warning lamp on. ABS not functioning.
Solenoids. Open Circuit
Fault symptoms
ABS warning lamp on. ABS not functioning.
Conditions
•
|
If no current is supplied to three or more of the valves.
|
•
|
If the control module's internal voltage relay is defective.
|
•
|
No current (+30 circuit) supplied to the control module (pins 17 and 18).
|
Diagnostic help
The solenoid valves can be activated using the diagnostic tool.
Select the valve from the submenu. The selected valve will be activated at a frequency of 1 Hz for about 30 s.