C2415, C2450 , C2455 , C2485
Read the instructions below then start the fault diagnostic procedure.
Symptom: ABS warning lamp on. ABS not functioning.
| C2415, C2450 , C2455 , C2485 |
C2415 Solenoid Valves Rear Left. Incorrect
C2450 Solenoid Valves Front Left. Incorrect
C2455 Solenoid Valves Front Right. Incorrect
C2485 Solenoid Valves Rear Right. Incorrect
Fault symptoms
ABS warning lamp on. ABS not functioning.Conditions
The valves are monitored continuously for circuit continuity and short-circuiting.The valve test starts when the ignition is switched ON and road speed is above 6 km/h.
Diagnostic help
The solenoid valves can be activated using the diagnostic tool.| - |
Select “Activate”.
|
|
| - |
Select “Valves”
|
|
Select the valve from the submenu. The selected valve will be activated at a frequency of 1 Hz for about 30 s.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
