Pedal position
| Pedal position |
Information on the pedal position is sent on the P-bus by the engine management system. See also Pedal position, Trionic.
The TC/ABS control module uses the information on pedal position to determine the degree of wheel spin to allow during TCS modulation. The system considers the pedal position to be the degree of aggressiveness the driver requests and allows a greater degree of wheel spin the more the pedal is depressed (pedal position increases as a percentage).
The TC/ABS control module uses the information on pedal position to determine the degree of wheel spin to allow during TCS modulation. The system considers the pedal position to be the degree of aggressiveness the driver requests and allows a greater degree of wheel spin the more the pedal is depressed (pedal position increases as a percentage).
Diagnostics
In the event of incorrect information on the pedal position, diagnostic trouble code C1926 will be generated, the TCS function will be disabled and the TCS OFF lamp will come on.This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
