Belt pulley, power steering pump, petrol engine
Belt pulley, power steering pump, petrol engine |
1. |
Remove the air filter unit.
|
2. |
Take the strain off the belt tensioner and remove the belt from the pulley.
|
3. |
Use
89 96 423 Puller, servo pump belt pulley
to remove the belt pulley.
|
To fit |
1. |
Fit the new belt pulley onto the shaft.
|
2. |
Use
89 96 415 Fitting tool, servo pump belt pulley
to pull in the new belt pulley.
|
3. |
The pulley must be fitted so that the hub sits flush with the end of the pump shaft.
|
4. |
Place the belt on the pulley and tension the belt tensioner.
|
5. |
Fit the air filter unit.
|