SAAB WIS ONLINE

Stepping motor, air distribution damper

Stepping motor, air distribution damper


Removing


1. Remove the ACC unit, see ACC control module .

2. Remove both retaining bolts from the stepping motor.

3. Unplug the connector.


Fitting



1. Plug in the connector.

2. Fit the stepping motor and tighten the retaining bolts.

3. Put in place the ACC module, see ACC control module .

4. Calibrate the ACC-system by simultaneously pressing the buttons “AUTO” and “OFF”.

Important

All previous diagnostic trouble codes are erased when calibrating. Obtain readouts of stored diagnostic trouble codes before calibrating.