SAAB WIS ONLINE

Increased user programming

Increased user programming




The ACC control module can also be programmed by the user so that certain automatic functions are changed. These are stored so that the control module selects these until they are cancelled. Programming as well as cancellation of selections is done by pressing ECON or electrically heated rear window for more than 1.2 seconds. In both cases, selections are acknowledged by the selected function symbol flashing 4 times and an explaining text is displayed on the SID for 5 seconds.

The increased functions are explained below:

ECON

The function is selected automatically when the outside temperature is below 10°C at the same time as the solar intensity is less than 351 W/m 2 , and is restored when the temperature exceeds 13°C and the solar intensity exceeds 351 W/m 2 .

Note

The ACC control module does not accept an increasing outside temperature if the travel speed is under 30 km/h.

Adjusting

The ACC unit can be programmed to select ECON at other temperatures using the diagnostics tool.

Electrically heated rear window and door mirrors

The engagement time depends on outside temperature.

At 5°C, the time is 4 minutes and at lower temperatures the time increases to max 10 minutes as is attained at an outside temperature lower than -10°C.

Note

Experience shows that half of all ACC control modules that claims were made for during the warranty period were free of defects but programmed by the user. It is therefore very important to explain the function to the customer.