Side panel, CV
Side panel, CV |
1. |
Mount the car in an alignment bench with measuring fixture and cross-measure as necessary.
|
2. |
Drill out the spot-welds.
|
3. |
Knock away the side panel and align any deformed metal. Keep the lower edge in front of the wheel housing and use it as a template when drilling holes in the new side panel for plug welding.
|
4. |
Drill holes in the new side panel for plug welding.
|
5. |
Grind clean the surfaces to be welded on the new side panel.
|
6. |
Grind clean the surfaces that are to be welded on the body.
|
7. |
Apply welding primer on the surfaces to be spot-welded. Use Teroson Zinkspray.
|
8. |
Put the side panel in place and secure it with a couple of welding clamps.
|
9. |
Put the boot lid in place and adjust the side panel.
|
10. |
Remove the boot lid. Spot and plug weld on the side panel.
|
11. |
Grind the welds.
|
12. |
Remove any remaining welding primer. Welding primer reduces adhesion of paint, filler and sealant.
|
13. |
Apply primer to all ground surfaces. Use Standox 1K Primer.
|
14. |
Seal joints and sheet metal flanges with sealant. Use Terostat 1K-PUR.
|
15. |
Apply anti-corrosion agent to internal surfaces after painting. Use Terotex HV 400.
|