Rear door
Rear door |
To remove |
1. |
Open the front door so that the grommet for the rear door wiring harness in the B-pillar is accessible.
|
2. |
Pull out the wiring harness rubber passage from the B-pillar.
|
3. |
Pull out the connectors and unplug.
|
4. |
Open the rear door.
|
5. |
Drive out the bushing from the door stop.
|
6. |
Remove the hinge bolts.
|
7. |
Carefully lift the door off its hinges. The door must be opened completely before it can be removed.
|
To fit |
Fit in reverse order.
Tightening torque:
Hinge bolts: 47 Nm (35 lbf ft).
Note | ||
In order to get the correct fit between the door and the wing, it may be necessary to lift slightly at the rear edge of the door. |
Connect the diagnostics tool and erase any diagnostic trouble code.
Adjustment |
Adjust the door, see Adjustment of front and rear doors