SAAB WIS ONLINE

Bridge spoiler, rear 5D/3D

Bridge spoiler, rear 5D/3D

Removing



1. Remove the wiper arm and open the tailgate.

2. Remove the window coverings and trim on the inside of the tailgate.

3. Remove the wiper motor as follows:

3.a. Unplug the wiper motor connector

3.b. Remove the 3 wiper motor retaining screws.

3.c. Lift out the wiper motor.

4. Remove the spoiler, collect nuts and washers.


5. If necessary, remove the zinc tape and clean the tailgate. Affix new zinc tape.

6. If necessary, remove seals and clean the spoiler. Fit new seals.


Fitting



1. Fit the spoiler, 4 nuts with washers.

2. Fit the wiper motor.


3. Fit the trim on the inside of the tailgate, close the tailgate.

4. Fit the wiper arm.

Check the function.