SAAB WIS ONLINE

Bridge spoiler, rear CV

Bridge spoiler, rear CV

Removing


1. Open the tailgate.

2. Remove the closing handle and trim on the inside of the boot lid.

3. Remove the centre-mounted brake light.


4. Remove the rubber plug and rubber bushes. Note how many turns the bushes are screwed in.

5. Undo the nuts and lift off the spoiler.


6. If necessary, remove the zinc tape and clean the boot lid. Affix new zinc tape.

7. If necessary, remove seals and clean the spoiler. Fit new seals.


Fitting



1. Lift the spoiler into position and fit the washers and nuts.

2. Fit the centre-mounted brake light.


3. Refit the trim on the inside of the boot lid.

4. Fit the rubber plug and rubber bushes.

Adjust the bushes.

5. Close the boot lid.