SAAB WIS ONLINE

Bumper, rear

Bumper, rear

Removing



1. Open the tailgate.

2. Remove the door sealing moulding at the lower edge.

3. Remove the lashing eyes.


4. Fold down the luggage compartment mat.

5. Remove the scuff plate by pulling it straight up, it is fastened with clips.

6. Undo the nuts securing the bumper.


7. Drill out the two blind rivets and remove the plastic moulding securing the front edges of the bumper to the wheel housings.

8. Remove the bumper by pulling it rearwards so that it clears the attachments.

Important

Work carefully when removing to avoid damaging the paintwork.



Fitting



1. Position the bumper on the car and screw on the nuts.

Tightening torque: 39 Nm (29 lbf ft).

2. Adjust the fit and tighten the retaining nuts.

3. Mount the plastic mouldings in the front of the bumper, above the wheel housing edges.

4. Fit the scuff plate by pressing it into place and securing it with the clips and then fit the lashing eyes.


5. Fold back the mat in the luggage compartment.

6. Refit the tailgate weatherstrip moulding.


7. Close the tailgate and check the bumper fit.