Door trim, CV
Door trim, CV |
1. |
Remove the cover by the door mirror.
|
2. |
Remove the door opening handle by loosening the bolt under the cover.
|
3. |
Remove the closing handle cover.
|
4. |
Remove the screws that secure the door trim.
|
5. |
Remove the expander rivet.
|
6. |
Carefully pull away the door trim and lift it off the lock button.
|
7. |
Remove the boot lid opening button.
|
To fit |
In order to decrease the number of parts kept in stock, the same door trim has been used on the Saab 9-3 Coupé and Saab 9-3 Convertible. When fitting new door trim on the Saab 9-3 Convertible, the front upper corner of the trim must be cut as follows:
1. |
Mark the cutting line.
|
2. |
Position a support along the cutting line and cut away the corner. Use a hacksaw or a knife.
|
3. |
Put in place the boot lid opening button.
|
4. |
Position the door trim and press it in place.
|
5. |
Tighten the bolts and fit the lock washer.
|
6. |
Refit the door pull cover.
|
7. |
Refit the opening handle, tighten the bolt and press on the cover.
|
8. |
Refit the cover by the door mirror.
|