Control panel
Control panel |
Removing |
1. |
Remove the glove box. See 8:2 Interior equipment.
|
2. |
Remove the side panel on the right side of the centre console.
|
3. |
Press out the control panel from the rear and disconnect it from the control shaft.
|
4. |
Remove the connectors.
|
5. |
Remove the clip securing the wire to the control panel.
|
6. |
Unhook the wire loop.
|
Fitting |
1. |
Fit the control wire at the rear of the control panel. The wire should be positioned above the control shaft.
|
2. |
Press on the clip that secures the wire in the control panel.
|
3. |
Plug in the connectors.
|
4. |
Fit the control panel and fit the control shaft.
|
5. |
Refit the side panels on the centre console.
|
6. |
Refit the glove box. See 8:2 Interior equipment.
|