Lamp body for direction indicators, guide pin
|
|
Lamp body for direction indicators, guide pin
|
|
1.
|
Identify the plastic. See
or
|
|
2.
|
Select the appropriate welding wire and set the correct working temperature on the welding pistol so that it corresponds with the type of plastic. See
|
|
3.
|
Tack on the guide pin by heating it with the hand welder. Check its position.
|
|
4.
|
Adjust the welding rod to make it thinner.
|
|
5.
|
Weld on the guide pin. Check the marking on the direction indicator lamp body and refer to the welding rod table to obtain the correct welding rod.
|
|
6.
|
Allow the weld to cool.
|
|
7.
|
Sand down the welded joint as necessary.
|
