Backrest, 60-percent
Backrest, 60-percent |
1. |
Remove the 40 per cent part, .
|
2. |
Release the backrest from the seat-belt member.
|
3. |
Fold forward the backrest.
|
4. |
Remove the centre seat-belt mounting to access the right-hand backrest mounting.
|
5. |
Remove the right-hand backrest mounting.
|
6. |
Pull out the free end of the backrest and remove the joint pin from its mounting by the wheel housing.
|
7. |
Detach the upholstery tensioner and lift out the backrest.
|
To fit |
Fit in reverse order
Note | ||
When fitting the centre seat-belt mounting, the upper and lower parts must be located in each other and a locating stud in the floor. |