Backrest upholstery, 3D/5D
|
Backrest upholstery, 3D/5D
|
1.
|
Press out the sides of the long load opening to free the pins securing the armrest. Loosen one side at a time.
|
2.
|
Put the armrest on a workbench.
|
3.
|
Remove the upholstery by undoing the fastening at the back and pulling the upholstery from the armrest.
|
4.
|
Remove the backrest completely.
|
5.
|
Place the backrest face down on a workbench.
40-percent part:
Remove the lock brace and joint.
60-percent part:
Remove the joint.
|
6.
|
Detach the upholstery and padding from the bottom by lifting the fastening strip and removing the upholstery and padding.
|
7.
|
Detach the upholstery by cutting the staples.
|
Note
|
Fit in reverse order. Fasten the upholstery to the padding with staples using the pliers supplied with the fitting kit.
|