Seat cushion, rear seat, 3D/5D
|
Seat cushion, rear seat, 3D/5D
|
1.
|
Remove the seat cushions.
|
2.
|
Lay the cushions face down on workbench with protective covering.
|
3.
|
Detach the bottom of the upholstery, towards the hinge, by hand. Pull straight up and continue around the whole of the bottom. The upholstery is secured with a fastening strip sewn into it.
|
4.
|
Turn over the seat and lift off the upholstery and padding from the bottom.
|
5.
|
Detach the upholstery from the padding by cutting the staples.
|
Fit in reverse order.
Note
|
Fasten the upholstery to the padding with staples using the pliers included in the fitting kit.
|