SAAB WIS ONLINE

Sunroof assembly

Sunroof assembly

To remove


Note

It is recommended that 2 people carry out steps 6 and 7.



1. Remove the headlining, see Trim, headlining .

2. Remove the four drain hoses from the nipples in the sunroof unit.

3. Remove the grounding point for the motor from the interior light console.

4. Remove the four retainer bolts that secure the console to the interior lighting and lift out the console.

5. Remove the retainer bolts that secure the sunroof unit, leave one bolt at the front edge and one bolt in each rear corner.

6. With assistance, remove the three remaining retainer bolts and lower the sunroof unit together with another person.

7. Open the tailgate and lift out the sunroof unit (2 persons).


To fit




Note

Two persons should work together in steps 1 and 2.



1. With assistance, lift the sunroof unit into position, make sure that unit fits into its guides.

2. Tighten a bolt at the front edge and a bolt at each rear corner (2 persons).

3. Fit the console for the interior lighting.

4. Fit and tighten the remaining retainer bolts for the sunroof unit.

Tightening torque 5 Nm (3.7 lbf ft)

5. Connect the grounding point for the motor in the console for the interior lighting.

6. Fit the four drain hoses onto the nipples.

7. Fit the headlining, see Trim, headlining .

8. Check the function.