SAAB WIS ONLINE

30 02 524 Conductive paint

30 02 524 Conductive paint


Specifications

Electrolube SCP 03B. 1.42 g bottle.

Saab application

Repairing heating coils on electrically heated rear windows.

Packaging

1

Transport

The product is classified as dangerous goods when transporting. Special regulations apply to packaging, marking and transport, therefore existing lead times cannot be guaranteed.

Directives

The product is highly flammable. May be hazardous if inhaled after frequent and repeated exposure. Dehydrates the skin. Avoid inhaling vapours/mist. Avoid skin contact. Make sure that ventilation is adequate.

Material safety data sheet


1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING

Trade name

Silver conductive paint

Product code

SCP03B/26G

Manufacturer - supplier

ELECTROLUBE

H.K. Wentworth Ltd.

Wentworth House, Blakes Road,

Wargrave, Berkshire, RG10 8AW,

United Kingdom.

Tel (UK): +44 (0) 118 9404031



2. COMPOSITION/INFORMATION ON INGREDIENTS

Chemical name

CAS-no.

EC-no.

Weight %

Hazard class/R-phases

Acetone

67-64-1

200-662-2

5-10

F; R11 Xi;R36 R66 R67

Ethanol

64-17-5

200-578-6

10-30

F; R11

Silver

7440-22-4

-

40-70

-

Ethylacetate

141-78-6

205-500-4

<5

F; R11, Xi; R36, R66, R67

Non-hazardous constituents

< 50



Key

FB/FH/FM = Hazard code for fire/health/environment

T+ = Very toxic

T = Toxic

C = Corrosive

Xn = Harmful

Xi = Irritant

V = Moderately harmful

IK = Not subject to labelling

E = Explosive

O = Oxidizing

F+ = Extremely flammable

F = Highly flammable

N = Dangerous for the environment



3. HAZARDS IDENTIFICATION

Most important hazards

Highly flammable.

Special risks

High concentration of vapours may cause irritation to eyes and respiratory system and produce narcotic effects. Prolonged skin contact may defat the skin and produce dermatitis.



4. FIRST AID MEASURES

General advice

Remove from exposure, lie down.

Inhalation

Move to fresh air. Consult a physician after significant exposure.

Skin

Wash off immediately with soap and plenty of water. Treatment : skin cream.

Eyes

Rinse immediately with plenty of water for at least 15 minutes. Consult a physician for severe cases.

Ingestion

Immediately give large quantities of water to drink. If symptoms persist, call a physician.



5. FIRE-FIGHTING MEASURES

Suitable extinguishing media

Extinguish with dry chemical or foam, carbon dioxide (CO2).

Extinguishing media which must not be used for safety reasons

Do not use water jet.

Specific hazards

Fire or intense heat may cause violent rupture of packages. Water mist may be used to cool closed containers.

Special protective equipment for firefighters

In the event of fire, wear self-contained breathing apparatus.



6. SPILLAGE/ACCIDENTAL RELEASE MEASURES

Personal precautions

Remove all sources of ignition.

Environmental precautions

Do not contaminate surface water.

Methods for cleaning up

Soak up with inert absorbent material. Shovel into suitable container for disposal.



7. HANDLING AND STORAGE

Handling

Use only in well-ventilated areas. Do not breathe vapours or spray mist.. When using, do not eat, drink or smoke.

Storage

Store in a cool and shaded area. Use only in well-ventilated areas. Keep away from heat and sources of ignition.



8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Chemical name

National occupational exposure limits: HSC(EH40)

Acetone

Long term (8 hrs) = 750ppm/1810mgm -3 Short term (15 min) = 1500ppm/3620mgm -3

Ethanol

Long term (8 hrs) = 1000ppm / 1920mgm -3

Silver

Long term (8 hrs) = 0.1mgmƒ-3ƒ

Ethylacetate

Long term (8 hrs) = 400ppm / 1460mgm -3



Technical measures

Ensure adequate ventilation, especially in confined areas.

Respiratory equipment

Not required under normal use.

Hand protection

Solvent-resistant gloves (butyl rubber).

Eye protection

Safety glasses.

Skin and body protection

Not required under normal use.

Hygiene measures

When using, do not eat, drink or smoke.



9. PHYSICAL AND CHEMICAL PROPERTIES

Form/state

Liquid

Odour

Characteristic

Colour

Grey

Boiling point

56°C

Flash point

-19 °C

Autoignition temperature

255 °C

Explosion limits

1.3-19 vol. %

Relative density

>= 1.7 at 20°C

Water solubility

Immiscible at 20°C



10. STABILITY AND REACTIVITY

Stability

Stable.

Conditions to avoid

Keep away from open flames, hot surfaces and sources of ignition.

Hazardous decomposition products

No decomposition if stored and applied as directed.



11. TOXICOLOGICAL INFORMATION

Acute toxicity

Acetone: LD50/oral/rat = 1700-10700mg/kg

Ethanol: LC50/inhalation/4h/rat = >8000mg/kg

Local effects

High concentration of vapours may cause irritation to eyes and respiratory system and produce narcotic effects.

Sensitization

Not applicable.

Long term toxicity

Liver injury may occur.

Chronic toxicity

Effects of excessive exposures may include liver toxicity.



12. ECOLOGICAL INFORMATION

Mobility

No data is available on the product itself.

Persistence and degradability

Readily biodegradable, according to appropriate OECD test.

Bioaccumulation

Not applicable.

Ecotoxicity effects

No data is available on the product itself.



13. DISPOSAL CONSIDERATIONS

Waste from residues/unused products

In accordance with local and national regulations.

Contaminated packaging

Do not pierce or burn even when empty.



14. TRANSPORT INFORMATION

UN-no.

1263



ADR/RID

Class: 3

Proper shipping name: Paint

Item: 5° (c)

IMO

Class: 3.1

3-05

Paint

IMDG Page: 3139

MFAG: 310,313

ICAO

Class: 3

Proper shipping name: Paint



15. REGULATORY INFORMATION

Classification according to European directive on classification of hazardous preparations 90/492/EEC.

Contains

Acetone.

Symbols

F - Highly flammable



R-phrases

R11

Highly flammable.

S-phases

S3

Keep in a cool place.

S9

Keep container in a well-ventilated place.

S16

Keep away from sources of ignition - No smoking.

S33

Take precautionary measures against static discharges.



16. OTHER INFORMATION

General information

The information provided in this material safety data sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.

Revision number

4

Further information

CN no. 32089091 Contact Name: Carolyn Booth Department: Technical

Issued

2000-10-18