SAAB WIS ONLINE

30 07 077 Sealing strip

30 07 077 Sealing strip


Specifications

Teroson Terostat II (T238). Gray. Plastic sealing strip based on synthetic rubber. 4 rolls of 10 metres each/package, 20x2 mm.

Saab application

For sealing screwed body panels, wings, etc.

Packaging

1

Transport

No restrictions apply when transporting this product.

Directives



Material safety data sheet


1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING

Product name

Terostat II (T238)

Supplier

Loctite Sweden AB

Automotive Aftermarket

P.O. Box 8823

SE-402 71 GÖTEBORG

Tel: +46 31 750 54 00

Manufacturer

Henkel Teroson GmbH, Heidelberg, Germany



2. COMPOSITION/INFORMATION ON INGREDIENTS

The product is chemically characterized as a solvent-free sealant band based on synthetic rubber. Does not contain any substances requiring declaration at concentrations above the individual limits as per the guidelines for preparations.

3. HAZARDS IDENTIFICATION

General information

No direct risks if used in accordance with instructions.



4. FIRST AID MEASURES

In case of emergency, ring 112 and ask for poisons information.

Inhalation

No special measures required.

Skin

No special measures required.

Eyes

No special measures required.

Ingestion

In case of symptoms, seek medical advice.



5. FIRE-FIGHTING MEASURES

Measures

No special measures required.

Suitable extinguishing media

No restrictions.



6. SPILLAGE/ACCIDENTAL RELEASE MEASURES

No special measures. See also under heading 13.

7. HANDLING AND STORAGE

Advice for safe handling

No special measures required.

Storage instructions

Cool. Optimum storage temperature: 15°C-25°C.



8. EXPOSURE CONTROLS/PERSONAL PROTECTION

General information

In addition to good working hygiene and standard safety precautions for the handling and use of chemical products, the exposure time for constituent harmful products must be observed. In general, working with chemicals requires adequate ventilation and the use of eye/face protection and protective gloves, if not to avert danger to avoid discomfort, skin reactions, etc. Refer to AFS 1993:40.

Hygiene measures

When using do not eat, drink or smoke. After completion of work and before taking a break, wash hands with soap and water.

Restrictions

There are no restrictions noted in AFS 1996:2 for the substances constituting the product nor for the product as a preparation.



9. PHYSICAL AND CHEMICAL PROPERTIES

The physical and chemical properties specified here are not registered, applicable or relevant to the product as a preparation.

Form/state

Plastic

Odour

None

Colour

Dark blue

Solubility in water

Insoluble

Density

1.550 g/cm 3

Solubility

Soluble in aliphates, aromates



10. STABILITY AND REACTIVITY

Thermal decomposition

None if used as directed.

Hazardous reactions

None if used as directed.

Hazardous decomposition products:

None if used as directed.



11. TOXICOLOGICAL INFORMATION

General information

No known toxic properties.



12. ECOLOGICAL INFORMATION

Ecotoxicity

No ecotoxic data recorded for the product as a preparation, but due its constituents, do not empty into drains or watercourses.



13. DISPOSAL CONSIDERATIONS

No restrictions. Contact your municipality regarding any local regulations and for recovering packaging.

14. TRANSPORT INFORMATION

Data regarding the material. Consideration is not taken to possible unrestricted quantities.

Sea (IMDG)

Not hazardous goods.

Land (ADR)

Not hazardous goods.

Air (DGR):

Not hazardous goods.



15. REGULATORY INFORMATION

Symbol

None.

Safety phrases

Does not contain any substances requiring declaration at concentrations above the individual limits as per the guidelines for preparations.



16. OTHER INFORMATION

General

In case of persistent headache, nausea or other persistent discomfort during or after work with chemicals, seek medical advice and take along the label or the technical data sheet for the product(s) in question.

Revised version

Due to change of responsibility (distributor).

Validity

There may be a slight delay in relabelling after the given changes, which may lead to discrepancy between the product packaging and this information. The information on this sheet takes precedence.

Replaces

1997-04-14

Issued

1998-01-01