30 18 702 Primer

/ 9-3 (9400) / 2003 / 0. General / Chemicals / Technical data / 30 18 702 Primer

30 18 702 Primer

Specifications

Betaprime 5402. Red lid. 30 ml container.

Saab application

For adhesive kits Saab 30 05 600 and 30 05 618.

Packaging

Transport

The product is classified as dangerous goods when transporting. Special regulations apply to packaging, marking and transport, therefore existing lead times cannot be guaranteed.

Directives

The product is highly flammable and dangerous to personal health. Contains isocyanates. May cause allergic reaction if inhaled. Irritates eyes and respiratory organs. Can be dangerous if inhaled after prolonged and repeated exposure. Dehydrates the skin. Avoid inhaling vapours/mist. Avoid skin contact. Make sure that ventilation is adequate.

Material safety data sheet

IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING

Trade name	BETAPRIME 5402
Application	Primer for plastic and paint.
Supplier	SAAB-ANA Konsult AB Box 1030 611 29 NYKÖPING Tel: +46 (0) 155-24 94 50

COMPOSITION/INFORMATION ON INGREDIENTS

Ingredient	CAS-no.	Content (%)	Hazard symbol/R-phrases
Butanone	78-93-3	>50	Xi, R11-20
Toluene	108-88-3	1-5	Xn, R11-20
Ethylacetate	141-78-6	5-10	V R320-313
MDI, isomer + homologues	9016-87-9	5-10	Xn, R20-36/37/38-42

Key

FB/FH/FM = Hazard code for fire/health/environment

T+ = Very toxic

T = Toxic

C = Corrosive

Xn = Harmful

Xi = Irritant

V = Moderately harmful

IK = Not subject to labelling

E = Explosive

O = Oxidizing

F+ = Extremely flammable

F = Highly flammable

N = Dangerous for the environment

HAZARDS IDENTIFICATION

Flammability	Highly flammable. Defats the skin.
Harmful properties	Irritating to eyes, respiratory system and skin. Can cause sensitization by inhalation. Contains isocyanates (MDI).

FIRST AID MEASURES

Inhalation	Fresh air and rest. In case of breathing difficulties, seek medical advice immediately.
Skin	Wash with soap and plenty of water. Take off contaminated clothing.
Eyes	Rinse immediately with plenty of water (ideally running water) for several minutes. Seek medical advice if irritation persists.
Ingestion	Drink water. Seek medical advice.

FIRE-FIGHTING MEASURES

Suitable extinguishing media	Foam, powder or carbon dioxide. Move or cool with water closed containers that are in the vicinity of the fire.
Hazardous decomposition products	Toxic products of combustion form, e.g. isocyanates. Refer to heading 10.
Personal protection equipment in case of fire	Use a respiratory mask with fresh air supply or firefighting suit when fighting the fire.
Other information	Move or cool with water closed containers that are in the vicinity of the fire.

SPILLAGE/ACCIDENTAL RELEASE MEASURES

Personal precautions	Refer to sections 8 and 13 for personal protection equipment and disposal considerations.
Precautions to avoid environmental damage	Keep away from drains and water.
Methods for cleaning up	Confine the spillage or soak it up with a suitable absorbent material.

HANDLING AND STORAGE

Handling	Avoid contact with eyes and skin. Make sure ventilation is adequate and do not breathe vapours.
Storage	Keep containers tightly closed in a cool, well-ventilated place at a temperature between +15 and +30°C.

EXPOSURE CONTROLS/PERSONAL PROTECTION

Respiratory equipment	Method	Limit	Remarks
Butanone	NGV	150 mg/m ³	AFS 1996:2
Toluene	NGV	200 mg/m ³	"
Ethylacetate	NGV	500 mg/m ³	"

Respiratory equipment	Use respiratory equipment with gas filter A (brown) + particle filter P2 if ventilation is inadequate.
Eye protection	Use eye/face protection if there is a risk of contact with the eyes.
Skin protection:	Avoid skin contact by wearing suitable protective gloves.

PHYSICAL AND CHEMICAL PROPERTIES

Form/state	Liquid	Odour	Solvent
Colour	Black	Solubility	Insoluble in water (reacts)
Density	900 kg/m³	Autoignition point	410 °C
Flash point	- 8 °C	Solubility in water	Insignificant
Boiling point	77 °C	Melting point	-
Explosion limit	0.8-11.5 %	Vapour pressure	110 mBar
Temp.	20 °C	pH conc.

10.

STABILITY AND REACTIVITY

Reacts with	The product reacts violently with water, alcohols, amines and other oxidizing agents.
Hazardous decomposition products	If the product (even cured product) is exposed to high temperatures or fire, toxic decomposition products will form, such as isocyanates, nitrous oxides and carbon monoxide.

11.

TOXICOLOGICAL INFORMATION

General	If the product is heated by welding, grinding or the like, vapours/dust containing isocyanates can form.
Inhalation	Inhalation of these vapours/dust may cause sensitization and cause respiratory difficulties. Symptoms may occur even at low air concentrations and may not appear until several months after the exposure.
Skin contact	May cause mild irritation and there is a small risk of allergic eczema.
Eyes	Contact with the eyes may cause irritation and stinging.
Ingestion	Ingestion may cause nausea and vomiting.

12.

ECOLOGICAL INFORMATION

Ecotoxicity

No data on ecotoxicity presently available for this product.

13.

DISPOSAL CONSIDERATIONS

Disposal considerations

Collect spillage, waste products and spent absorbent material in a container. Mark the container with its contents and dispose of in accordance with national and local regulations.

14.

TRANSPORT INFORMATION

Proper shipping name	Paint-related material
UN-no.	1993
Packaging group	II
ADR	3.3 (b)
IMDG	Class: 3.2 EmS-no.: 3-07 MFAG-no.: 340
DGR	3

15.

REGULATORY INFORMATION

Labelling

Harmful (Xn)

Highly flammable (F)

R-phrases	R11	Highly flammable.
	R36	Irritating to eyes.
	R37	Irritating to respiratory system
	R38	Irritating to skin
	R42	May cause sensitisation by inhalation.
S-phases	S16	Keep away from sources of ignition - No smoking.
	S26	In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
	S38	In case of insufficient ventilation, wear suitable respiratory equipment.
General information	The product is classed and labelled in accordance with the regulations of the Swedish National Chemical Inspectorate and the Swedish National Inspectorate of Explosives and Flammables. Observe any local regulations regarding the substances contained in the product. The provisions of the Swedish National Board of Occupational Safety and Health on thermosetting plastics apply for handling.

16.

OTHER INFORMATION

General information

NOTE: Short best before date - first in, first out. The product is exempted from labelling with risk and safety phrases for flammable products due to the small size of the packaging. The product is also labelled: Contains isocyanates. Refer to manufacturer's information.

30 18 702 Primer

Our Friends