30 20 476 Ball bearing grease
|
30 20 476 Ball bearing grease
|
Molykote 33. Medium. Temperature interval -73
°
C to +180
°
C. 100 g tube.
Bushing grease for anti-roll bar, lubrication of sunroof. Replaces Molykote 7348 for greasing sunroof.
1
No restrictions apply when transporting this product.
Avoid skin and eye contact.
Material safety data sheet
|
1.
|
IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING
Product name
|
Dow Corning ® 33 Extreme low temp. Bearing grease, medium
|
Company
|
Dow Corning S.A.
Parc Industriel - Zone C
B-7180 Seneffe
Belgium
Tel: +49 6112371
|
|
2.
|
COMPOSITION/INFORMATION ON INGREDIENTS
Chemical characteristics
|
Silicon lubricant
|
Dangerous substances
|
No dangerous substances present.
|
|
3.
|
HAZARDS IDENTIFICATION
The product has no dangerous properties according to KIFS 1994:2 with amendments.
|
4.
|
FIRST AID MEASURES
Inhalation
|
First aid not required.
|
Skin
|
Wipe away and wash with soap and water.
|
Eyes
|
Rinse with water
|
Ingestion
|
First aid not required.
|
|
5.
|
FIRE-FIGHTING MEASURES
Suitable extinguishing media
|
Carbon dioxide, foam, powder or fine water spray. Water can be used to keep containers exposed to fire cool.
|
Special protective equipment/precautions
|
Wear a full breathing mask and protective clothing. Use water spray to cool containers until the fire is completely extinguished. Follow the emergency plan if the area requires evacuation or isolation.
|
Flammable products
|
Silica. Carbon dioxide and traces of incompletely combusted carbon compounds. Formaldehyde.
|
|
6.
|
SPILLAGE/ACCIDENTAL RELEASE MEASURES
Personal precautions
|
Use suitable protective equipment.
|
Environmental precautions
|
Large quantities must not enter drains or watercourses.
|
Methods for cleaning up
|
Scrape up and place in a container with lid. Spilt product makes the surface very slippery.
|
|
7.
|
HANDLING AND STORAGE
Advice for safe handling
|
Good ventilation is recommended. Avoid skin and eye contact.
|
Storage instructions
|
Do not store with oxidizing agents. Keep container tightly closed in a dry place.
|
|
8.
|
EXPOSURE CONTROLS/PERSONAL PROTECTION
Technical measures
|
Extraction: See section 7.
|
Exposure limits
|
No components have been assigned exposure limits.
|
Respiratory equipment
|
Respiratory equipment not normally required.
|
Hand protection
|
Wear protective gloves for chemicals.
|
Eye protection
|
Wear eye/face protection.
|
Skin protection
|
Wear a tightly-woven overall in conditions that could otherwise result in significant skin contact.
|
Hygiene measures
|
Follow good industrial hygiene procedures. Wash after use, especially before eating, drinking or smoking.
|
|
9.
|
PHYSICAL AND CHEMICAL PROPERTIES
Form/state
|
Grease
|
Odour
|
Mild
|
Colour
|
Pink
|
Flash point
|
> 101.1 °C
|
Explosive
|
No
|
Oxidizing properties
|
No
|
Density
|
1.1 g/cm
3
|
|
|
|
10.
|
STABILITY AND REACTIVITY
Stability
|
Stable under normal conditions of use.
|
Materials to avoid
|
Can react with strong oxidizing agents.
|
Hazardous decomposition products
|
Refer to section 11.
|
|
11.
|
TOXICOLOGICAL INFORMATION
Eye contact
|
Mildly irritating.
|
Skin
|
Prolonged or repeated contact may cause irritation.
|
Inhalation
|
No harmful effects normally expected.
|
Ingestion
|
Small quantities transferred from the hands to the mouth are not harmful. If swallowed, large quantities may cause nausea.
|
Other health information
|
At temperatures >150°C, the product can release formaldehyde vapour into the air. This is harmful by inhalation and irritating to the eyes and respiratory system at concentrations below 1 ppm. Heat curing can produce traces of 2,6-cis-diphenylhexamethylcyclotetrasiloxane and phenylheptamethylcyclotetrasiloxane. Both of these products may be adverse to the fertility of males.
|
|
12.
|
ECOLOGICAL INFORMATION
Mobility
|
Solid material. Insoluble in water. No negative effects expected.
|
Environmental effects
|
No adverse effects on aquatic organisms predicted.
|
Bioaccumulation
|
No risk of bioaccumulation.
|
Effects on sewage treatment
|
No adverse effects on bacteria predicted.
|
|
13.
|
DISPOSAL CONSIDERATIONS
Product handling
|
Dispose of in accordance with local regulations.
|
Packaging handling
|
Dispose of in accordance with local regulations.
|
|
14.
|
TRANSPORT INFORMATION
Road (ADR)
|
No special requirements for packaging or labelling.
|
Sea (IMDG)
|
No special requirements for packaging or labelling.
|
Air (IATA)
|
No special requirements for packaging or labelling.
|
|
15.
|
REGULATORY INFORMATION
S-phases
|
S24/25
|
Avoid skin and eye contact.
|
|
S51
|
Use only in well-ventilated areas.
|
Other information
|
No ozone depleting chemicals are present or used in manufacture.
|
Status
|
EINECS: All components are listed or exempted.
|
TSCA: All components are listed or exempted.
|
|
16.
|
OTHER INFORMATION
This material safety data sheet was prepared in compliance with Commission Directive 93/112/EC, 67/548/EEC and 88/379/EEC as well as their relevant amendments, on the approximation of laws, regulations and administrative provisions relative to the classification, packaging and labelling of dangerous substances and preparations. It is the responsibility of persons in receipt of this product safety data sheet to ensure that the information contained herein is properly read and understood by all people who may use, handle, dispose or in any way come in contact with the product. If the recipient subsequently produces a formulation containing the Dow Corning product, it is the recipient's sole responsibility to ensure the transfer of all relevant information from the Dow Corning product safety data sheet to their own product safety data sheet in compliance with Commission Directive 88/379/EEC. All information and instructions provided in this material safety data sheet are based on the current state of scientific and technical knowledge at the date indicated on the present safety data sheet. Dow Corning shall not be held responsible for any defect in the product covered by this material safety data sheet, should the existence of such defect not be detectable considering the current state of scientific and technical knowledge. As stated above, this Safety Data Sheet has been prepared in compliance with applicable European law. If you purchase this material outside Europe, where compliance laws may differ, you should receive from your local Dow Corning supplier a safety data sheet applicable to the country in which the product is sold and intended to be used. Please note that the appearance and content of the safety data sheet may vary - even for the same product - between different countries, reflecting the different compliance requirements. Should you have any question, please refer to your local Dow Corning supplier.
|