74 96 284 Thread locking adhesive
|
74 96 284 Thread locking adhesive
|
Loctite 577. Thread sealing compound. 50 ml bottle.
Thread sealant for temperature sensor and hollow screw on V6 Saab 900/9000 and bearing support in manual gearbox Saab 99/900 -M93, -M94 Convertible.
Sealant for bolts in engine/gearbox.
1
No restrictions apply when transporting this product.
Repeated or prolonged contact with scratched or sensitive skin may cause allergic reactions. Irritates eyes and skin. Avoid skin and eye contact.
Use Loctite dosage equipment in order to avoid contact with eyes and skin.
Material safety data sheet
|
1.
|
IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING
Product code
|
0128249
|
Product name
|
577
|
Manufacturer - supplier
|
Loctite Sweden AB
Box 8823
SE-402 71 GÖTEBORG
Tel: +46 31 7505400
Fax: +46 31 7505391
Tel (emergencies): +353-1-4599301 / +353-87-2629625 / +353-1-4046444
|
|
2.
|
COMPOSITION/INFORMATION ON INGREDIENTS
Product type
|
The product is based on polyethylene glycol dimethacrylate. Anaerobic threadlock.
|
Ingredient
|
CAS-no.
|
Conc.
|
R-phrases
|
Classification
|
1-acetyl-2-phenylhydrazine
|
114-83-0
|
0.10 - 1.00
|
R20/21/22, R40, R38, R43
|
Xn
|
Malein acid
|
110-16-7
|
0.50 - 1.00
|
R22, R36/37/38
|
Xn
|
Cumene hydroperoxide
|
80-15-9
|
0.10 - 1.00
|
R7, R21/22, R23, R34, R48/20/22, R51/53
|
O, T, N
|
Laurylmethacrylate
|
142-90-5
|
5.00 - 10.00
|
R36/37/38
|
Xi
|
Key
|
FB/FH/FM = Hazard code for fire/health/environment
T+ = Very toxic
T = Toxic
C = Corrosive
Xn = Harmful
Xi = Irritant
V = Moderately harmful
IK = Not subject to labelling
E = Explosive
O = Oxidizing
F+ = Extremely flammable
F = Highly flammable
N = Dangerous for the environment
|
|
3.
|
HAZARDS IDENTIFICATION
This product is not classified as hazardous. Repeated or prolonged contact with skin, particularly damaged skin, may cause sensitization or dermatitis in sensitive individuals.
|
4.
|
FIRST AID MEASURES
Inhalation
|
Remove affected person to fresh air, and if still feeling unwell seek medical attention.
|
Skin
|
Wash with soap and water. If irritation persists, seek medical advice.
|
Eyes
|
Rinse immediately with plenty of water for at least 15 minutes. If irritation persists, seek medical attention.
|
Ingestion
|
Rinse mouth with water then give plenty of water to drink. Do not induce vomiting. Seek medical advice.
|
|
5.
|
FIRE-FIGHTING MEASURES
Suitable extinguishing media
|
Non-flammable product (flash point >100°C). If product is involved in fire extinguish with dry powder, foam or carbon dioxide.
|
Fire/Explosions risks
|
Trace amounts of toxic fumes may be released on incineration.
|
Special protective equipment for firefighters
|
Use respiratory equipment.
|
|
6.
|
SPILLAGE/ACCIDENTAL RELEASE MEASURES
Personal precautions
|
Ventilate area.
|
Methods for cleaning up
|
For small spills wipe up with paper towel and place in container for disposal. For large spills absorb onto inert absorbent material and place in sealed container for disposal. Wash spillage site thoroughly with soap and water or detergent solution.
|
|
7.
|
HANDLING AND STORAGE
Advice for safe handling
|
Prolonged or repeated skin contact should be avoided to minimize any risk of sensitisation. Loctite applicators are recommended to minimize skin contact, particularly where workers are handling sharp or threaded parts which might result in microlaceration of sensitive areas of the skin.
|
Storage instructions
|
Store in original containers at 8°C-28°C and do not return residual materials to containers as contamination may reduce the shelf life of the bulk product.
|
|
8.
|
EXPOSURE CONTROLS/PERSONAL PROTECTION
Hand protection
|
In case of repeated or prolonged skin contact, wear suitable gloves made of polyethene, natural rubber or similar ester-resistant material.
|
Other information
|
Loctite applicators are recommended .
|
|
9.
|
PHYSICAL AND CHEMICAL PROPERTIES
Form/state
|
Liquid, Paste
|
Odour
|
Mild, characteristic
|
Colour
|
Yellow
|
pH
|
Range between 3 to 6
|
Solubility in water
|
Insoluble
|
Solubility in acetone
|
Miscible
|
Density
|
1.15 kg/m
3
|
Flash Point (PMCC)
|
>100 °C.
|
Vapour pressure
|
<0.5 mm Hg at 25°C
|
|
|
|
10.
|
STABILITY AND REACTIVITY
Stability
|
Stable under normal conditions.
|
Non-reactive with
|
Water or oxidizing agents except for peroxides.
|
Polymerisation
|
Polymerisation may occur after some time in the absence of air and/or the presence of a metal.
|
|
11.
|
TOXICOLOGICAL INFORMATION
Inhalation
|
Low volatility. Low risk that harmful vapours are liberated.
|
Skin
|
Acute dermal LD50 (rabbit) is estimated to be > 2000mg/kg. Although it is not a common sensitizer there may be a risk of sensitization on prolonged or repeated contact with damaged or sensitive skin.
|
Eyes
|
May cause irritation to the eyes.
|
Ingestion
|
This product is considered to be of low toxicity. Acute oral (rat) >5000mg/kg.
|
|
12.
|
ECOLOGICAL INFORMATION
Ecotoxicity
|
Biodegradable product of low ecotoxicity. Cured Loctite products are typical polymers and do not pose any immediate environmental hazards.
|
Storage
|
Keep away from water and drains.
|
Other information
|
Biological and Chemical Oxygen Demands (BOD and COD) of cured Loctite products are insignificant. The environmental impact of the cured product is insignificant in relation to the items in which it is used. Precautions required with respect to environmental hazards of articles in which this product is used should be considered.
|
|
13.
|
DISPOSAL CONSIDERATIONS
Disposal considerations
|
After use, packaging containing residual product should be disposed of as "chemically contaminated waste" in accordance with local and national regulations. Large quantities of unused products may be disposed as chemical waste after polymerizing by adding Loctite Activator 7638 or 7641. Dispose of in accordance with local and national regulations. Contribution of this product to waste is very insignificant in comparison to articles in which it is used.
|
|
14.
|
TRANSPORT INFORMATION
UN-no.
|
None
|
Air (IATA)
|
Not classified
|
Sea (IMO)
|
Not classified
|
Road/Rail (ADR/RID)
|
Not classified
|
|
15.
|
REGULATORY INFORMATION
R-phrases
|
None
|
S-phases
|
None
|
|
16.
|
OTHER INFORMATION
Supersedes material safety data sheet no: 0128249 dated 1999-02-15. This material safety data sheet was prepared in accordance with Commission Directive 98/98/EC adapting to technical progress for the 25th time Council Directive 67/548/EEC. Classification and labelling in accordance with KIFS 1999:3 The information in this safety data sheet was obtained from reputable sources and to the best of our knowledge is accurate and current at the mentioned date. Neither Loctite nor its subsidiary companies accept any liability arising out of the use of the information provided here or the use, application or processing of the product described herein. Attention of users is drawn to the possible hazards from improper use of the product.
Material safety data sheet revised
|
2000-08-14
|
For more information
|
Loctite Corporation, International Health and Regulatory Affairs, Tallaght Business Park, Whitestown, Dublin 24, Ireland.
Tel: +353-1-4046444
Fax: +353-1-4510806
|
Produced by
|
Dr Prabhu Kulkarni FICI, FIOSH, MBIRA, Senior HRA Specialist, Health and Regulatory Affairs - Europe.
|
|