SAAB WIS ONLINE

89 96 860 Power steering fluid

89 96 860 Power steering fluid


Specifications

For Saab. CHF 11S. 1 l bottle.

Saab application

Used from: Saab 900 M97 chassis nr V2022750, Saab 9000 M97 chassis nr V1014202, Saab 900 Convertible M96 chassis number DT7003151, Saab 9-5.

Packaging

1

Transport

No restrictions apply when transporting this product.

Directives

Not mixable with PS 4634, part number 40 - 315 161 224.

Material safety data sheet


1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING

Trade name

PENTOSIN CHF 11S HYDRAULIC FLUID

Part no.

1405900

Manufacturer - supplier

Deutsche Pentosin Werke GmbH

Industristrasse 39-43

D-22880 Wedel

GERMANY

Tel: (4103) 91 34-0

Fax: (4103) 91 34-71

Source of further information

Department FE

Information in case of emergency

24h emergency number +49 30 19240



2. COMPOSITION/INFORMATION ON INGREDIENTS

Description

Mixture of following components and non-hazardous additives:

Further references

The hazard classifications are given in plain text in section 16.



CAS-no.

Description

Content (%)

R-phrases

68649-11-6

1-Decene, dimer, hydrogenated

50-100

Xn; R65



Key

FB/FH/FM = Hazard code for fire/health/environment

T+ = Very toxic

T = Toxic

C = Corrosive

Xn = Harmful

Xi = Irritant

V = Moderately harmful

IK = Not subject to labelling

E = Explosive

O = Oxidizing

F+ = Extremely flammable

F = Highly flammable

N = Dangerous for the environment



3. HAZARDS IDENTIFICATION

Risk designation

Void

Special reference regarding hazards for people and the environment

The product is not subject to labelling according to evaluation for the final version of the general "EU classification directive for preparations".

Classification system

Classification corresponds to current EU lists but has been supplemented with information from specialized literature and company data.



4. FIRST AID MEASURES

General information

No special procedures necessary.

Inhalation

Remove to fresh air. In case of discomfort, seek medical advice.

Skin

In general, the product is not irritating to the skin.

Eyes

Flush the eyes under running for several minutes. Hold eyes wide open.

Ingestion

In case discomfort persists, seek medical advice.



5. FIRE-FIGHTING MEASURES

Suitable extinguishing media

Firefighting measures must be suited to the surroundings.

Protective equipment

No special procedures necessary.



6. SPILLAGE/ACCIDENTAL RELEASE MEASURES

Personal precautions

No measures necessary.

Environmental precautions

Prevent the product from entering the sewage network/surface water/ground water.

Methods for cleaning up

Soak up with absorbent material (sand, kieselguhr, acid absorbent, universal absorbent, sawdust).

Further references

No harmful substances liberated.



7. HANDLING AND STORAGE

Advice for safe handling

No special procedures necessary.

Storage

No special measures required.



8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Additional information on the design of technical systems

No additional information. Refer to section 7.

Limits

The product does not contain any quantities of materials with critical limits that require warning systems at the workplace.

Additional information

This sheet is based on the lists that were current during its production.

Personal protection equipment

General safety and hygiene procedures. Follow standard preventative measures when handling chemicals.

Respiratory equipment

Not required

Hand protection

Gloves must be impermeable and resistant to the product/substance/preparation. No recommendations can be provided as to glove material suitable for the product/substance/preparation since no tests have been carried out. Select a glove material with regard to penetration times, permeation coefficients and degradation.

Glove material

The suitability of gloves is not solely dependent on the material but also other qualitative criteria, and as such varies from manufacturer to manufacturer. Since the product is a preparation consisting of several substances, the durability of the glove material cannot be predicted and must therefore be checked by the user.

Penetration time of glove material

The exact penetration time can be obtained from the manufacture of protective gloves and must be observed.

Eye protection

It is recommended to wear eye protection for refilling.



9. PHYSICAL AND CHEMICAL PROPERTIES

Form/state

Liquid

Odour

Characteristic

Colour

Dark green

Vapour pressure (at 20°C)

0.001 hPa

Melting point

-57°C (ISO 3016)

Boiling point

>280°C (SAE J1703)

Flash point

>150°C (ISO 2592)

Autoignition point

235°C (DIN 51794)

Spontaneous combustion

The product does not spontaneously combust

Risk of explosion

The product is not explosive

Explosion limits

0.6-6.5 vol. %

Density (at 20°C)

>0.827 g/cm 3 (ISO 12185)

Solubility in water

Insoluble

Kinematic viscosity (at 40°C)

19 mm 2 /s (ISO 3104)



10. STABILITY AND REACTIVITY

Conditions to avoid

No conditions if used as prescribed.

Hazardous reactions

No known dangerous reactions.

Hazardous decomposition products

No hazardous decomposition products.



11. TOXICOLOGICAL INFORMATION

Skin

Mild irritation (OECD test 404)

Eyes

Mild irritation (OECD test 405)

Sensitization

No known sensitization effects.

Additional toxicological references:

The product is not subject to labelling with regard to the final version of EU general classification guidelines for preparations. From our experience and the information we possess, the product will not cause any harmful effects when handled professionally and used as intended.



12. ECOLOGICAL INFORMATION

General references

Water pollution class 2 (self-classification): Risk of water pollution. Do not allow to enter ground water, watercourses or sewers.



13. DISPOSAL CONSIDERATIONS

Recommendation

Small quantities can be disposed of with household waste.

Waste key numbers

Unused product: 541 06 (LAGA - Germany) Designation: Hydraulic oils containing no PCB Disposal instructions: Special incineration

European Waste Catalogue

13 00 00 OIL WASTES AND WASTES OF LIQUID FUELS (except edible oils, 05, 12 and 19)

13 01 00 Waste hydraulic oils

13 01 11 Synthetic hydraulic oils

Contaminated packaging

Recommendations: Dispose of in accordance with regulations.



14. TRANSPORT INFORMATION

Sea IMDG/GGVSee

Marine pollutant: No

Additional information

Non-hazardous according to regulations stated above



15. REGULATORY INFORMATION

Labelling according to EU guidelines

The substance is not subject to labelling according to EU lists or other sources of literature with which we are acquainted.

Water pollution - hazard class

WGK 2 (self-classification): Risk of water pollution.



R-phrases

R65

Harmful: may cause lung damage if swallowed.



16. OTHER INFORMATION

General information

The information is based on current knowledge. However, this does entail a guarantee as to the characteristics of the product nor provide grounds for a contractual agreement.

Material safety data sheet issued by

Department FE

Contact

Hr. Klose

Revised

2002-08-09

Issued

2002-08-09