SAAB WIS ONLINE

93 21 795 Flange sealant

93 21 795 Flange sealant


Specifications

Loctite 518. Replaces cut gaskets, quick hardening. 25 ml syringe.

Saab application

All manual gearboxes (not 6-speed).

Packaging

1

Transport

No restrictions apply when transporting this product.

Directives

The product is an irritant. Irritates eyes and skin. Skin contact may cause allergic reaction. Avoid contact with eyes and skin.

Material safety data sheet


1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING

Product code

0120733

Product name

518

Manufacturer - supplier

Loctite Sweden AB

Box 8823

SE-402 71 GÖTEBORG

Tel: +46 31 7505400

Fax: +46 31 7505391

Tel (emergencies): +353-1-4599301 / +353-87-2629625 / +353-1-4046444



2. COMPOSITION/INFORMATION ON INGREDIENTS

Product type

Anaerobe flange sealant



Ingredient

CAS-no.

Conc.

R-phrases

Classification

1-acetyl-2-phenylhydrazine

114-83-0

0.10 - 0.60

R20/21/22, R40, R38, R43

Xn

Acrylic acid

79-10-7

1.00 - 4.90

R10, R21/22, R35, R50

C

Cumene hydroperoxide

80-15-9

0.10 - 2.90

R7, R21/22, R23, R34, R48/20/22, R51/53

C

Hydroxyethylmethacrylate

868-77-9

0.10 - 0.90

R36/38, R43

Xi



Key

FB/FH/FM = Hazard code for fire/health/environment

T+ = Very toxic

T = Toxic

C = Corrosive

Xn = Harmful

Xi = Irritant

V = Moderately harmful

IK = Not subject to labelling

E = Explosive

O = Oxidizing

F+ = Extremely flammable

F = Highly flammable

N = Dangerous for the environment



3. HAZARDS IDENTIFICATION

Irritating to eyes, respiratory system and skin. Repeated or prolonged contact with damaged or sensitive skin may cause sensitization.

4. FIRST AID MEASURES

Inhalation

Remove affected person to fresh air.

Skin

Wash with soap and water. If irritation persists, seek medical advice.

Eyes

Flush immediately with plenty of water for at least 15 minutes. Seek medical advice immediately.

Ingestion

Rinse mouth with water then give plenty of water to drink. Do not induce vomiting. Seek medical advice.



5. FIRE-FIGHTING MEASURES

Suitable extinguishing media

Non-flammable product (flash point >100°C). If product is involved in fire extinguish with dry powder, foam or carbon dioxide.

Fire/Explosions risks

Trace amounts of toxic fumes may be released on incineration.

Special protective equipment for firefighters

Use respiratory equipment.



6. SPILLAGE/ACCIDENTAL RELEASE MEASURES

Personal precautions

Ventilate area.

Methods for cleaning up

Contain large spillages with sand, earth or similar natural material. Collect and place in a sealed container for disposal. Wash spillage site thoroughly with soap and water or detergent solution.



7. HANDLING AND STORAGE

Advice for safe handling

Use in well-ventilated area. Avoid contact with skin and eyes. Avoid repeated or prolonged contact with skin to limit risks of sensitization.

Storage instructions

Store in original containers at 8°C-21°C and do not return residual materials to containers as contamination may reduce the shelf life of the bulk product.



8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Occupational exposure limits.

Chemical identity

Limit value (SE)

Acrylic acid

NGV 10ppm 8h TWA.

KTV 15ppm (45mg/m3) 15min.



Ventilation

Use only in well-ventilated areas.

Hand protection

In case of repeated or prolonged skin contact, wear suitable gloves made of PVC, polyethene, natural rubber or similar ester-resistant material.

Eye protection

Wear eye/face protection.



9. PHYSICAL AND CHEMICAL PROPERTIES

Form/state

Paste

Odour

Characteristic

Colour

Purple

Boiling point

> 150 °C

Solubility in water

Insoluble

Solubility in acetone

Miscible

Density

1.05 kg/m 3

Flash Point (PMCC)

>100 °C.

Vapour pressure

Less than 3 mm Hg at 20°C



10. STABILITY AND REACTIVITY

Stability

Relatively stable under recommended conditions of storage and handling.

Non-reactive with

Water.

Polymerisation

Polymerisation may occur after some time in the absence of air and/or the presence of a metal.



11. TOXICOLOGICAL INFORMATION

Inhalation

Irritating to respiratory system.

Skin

Irritating to skin.

Eyes

May cause serious damage to eyes.

Ingestion

This product is considered to be of low toxicity. Acute oral (rat) > 2000 mg/kg.



12. ECOLOGICAL INFORMATION

Ecotoxicity

Biodegradable product of low ecotoxicity. Cured Loctite products are typical polymers and do not pose any immediate environmental hazards.

Storage

Keep away from water and drains.

Other information

Biological and Chemical Oxygen Demands (BOD and COD) of cured Loctite products are insignificant. The environmental impact of the cured product is insignificant in relation to the items in which it is used. Precautions required with respect to environmental hazards of articles in which this product is used should be considered.



13. DISPOSAL CONSIDERATIONS

Disposal considerations

After use, packaging containing residual product should be disposed of as "chemically contaminated waste" in accordance with local and national regulations. Dispose of in accordance with local and national regulations. Contribution of this product to waste is very insignificant in comparison to articles in which it is used.



14. TRANSPORT INFORMATION

UN-no.

None

Air (IATA)

Not applicable

Sea (IMO)

Not applicable

Road/Rail (ADR/RID)

Not applicable



15. REGULATORY INFORMATION

Contains

Cumene hydroperoxide

Hazard class

Irritant



R-phrases

R37/38

Irritating to respiratory system and skin.

R41

Risk of serious damage to eyes.

S-phases

S23

Do not breathe vapours.

S24/25

Avoid contact with skin and eyes.

S26

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

S39

Wear eye/face protection.



16. OTHER INFORMATION

The information in this material safety data sheet was obtained from reputable sources and to the best of our knowledge is accurate and current at the mentioned date. The provisions of the Swedish National Board of Occupational Safety and Health on thermosetting plastics, AFS 1996:4, apply to this product. This material safety data sheet was prepared in accordance with Commission Directive 98/98/EC adapting to technical progress for the 25th time Council Directive 67/548/EEC. Classification and labelling in accordance with KIFS 1999:3. Neither Loctite nor its subsidiary companies accept any liability arising out of the use of the information provided here or the use, application or processing of the products described herein. Attention of users is drawn to the possible hazards from improper use of the product.

Material safety data sheet revised

2001-05-31

For more information

Loctite Corporation, International Health and Regulatory Affairs, Tallaght Business Park, Whitestown, Dublin 24, Ireland.

Tel: +353-1-4046585

Fax: +353-1-4510806

Produced by

Dr Prabhu Kulkarni FICI, FIOSH, MBIRA, Senior HRA Specialist, Health and Regulatory Affairs - Europe.