Engine oil and oil filter
Engine oil and oil filter |
Check for oil leakage |
Check that no oil leakage occurs at the top or bottom of the engine/gearbox or in the power steering hydraulic system.
Engine oil |
Change oil. Fill to the MAX mark. The difference between the marks corresponds to 1 litre (1.05 qts).
Check the level when the engine is warm, 2-5 minutes after turning off the engine.
Oil capacity
B204, B234, B235: 4.0 litres (4.2 qts) including filterOil type
See Lubrication, lubricants .Tightening torques:
Drain plug
B204, B234, B235: 25 Nm (18.5 lbf ft)
Check the oil level after changing oil and oil filter.
|
Oil filter change |
• |
Loosen the oil filter with the filter wrench and unscrew it. Clean the sealing surface on the engine.
|
• |
Oil in the rubber gasket on the new filter and fit it. Tighten the filter by hand.
|
• |
Start the engine and check the filter for leaks.
|