SAAB WIS ONLINE

Engine mounting, rear

Engine mounting, rear

To remove



1. Undo the nut on the engine mounting.

2. Remove the engine cover, place lifting beam 83 94 850 above the engine and hook on the lifting eye. Lift the engine until the engine mounting bracket rises from the engine mounting.

3. Raise the car and remove the lower cover.


4. Detach the gear selector link from the bracket and remove the bracket from the gearbox.


5. Dismantle the rear engine mounting from the subframe.


To fit



1. Fit the engine mounting to the bracket so that the guide pin fits into the groove.

Tightening torque: 47 Nm (35 lbf ft).

2. Fit the engine mounting loosely to the subframe and tighten it to the gearbox.

Tightening torque: 84 Nm (62 lbf ft).

3. Refit the gear selector link to the bracket and lower the car.

4. Lower the engine, remove the lifting beam and put back the engine cover.

5. Raise the car and tighten the engine mounting to the subframe.


Tightening torque: 50 Nm (37 lbf ft).

6. Fit the lower cover and lower the car.