SAAB WIS ONLINE

Oil filter

Oil filter

To remove


1. Remove the upper engine cover.

2. Unplug the EGR-valve connector


3. Take off the lid on the oil filter housing and remove the oil filter.

Note

A 36 mm socket is required.



To fit


1. Change the O-rings.


2. Fit a new oil filter and tighten the lid on the oil filter housing.

Tightening torque 25 Nm (18 lbf ft).

3. Plug in the EGR-valve connector.

4. Top up engine oil according to specifications, see Lubricating system

5. Start the engine and let it run until the oil pressure warning lamp goes out. Stop the engine and check the oil level. Top up if necessary.