Charge air pipe
Charge air pipe |
To remove |
1. |
Remove the upper engine cover
|
2. |
Undo the bolt securing the bypass pipe to the turbocharger intake pipe.
|
3. |
Remove the bypass valve from the charge air pipe.
|
4. |
Unplug the connector for the pressure/temperature sensor on the charge air pipe.
|
5. |
Loosen the hose clamps on the throttle body and charge air hose.
Man: Detach the venturi hose from the charge air pipe |
6. |
Undo the bolt securing the charge air pipe to the mounting on the cylinder head and remove the pipe. Cover the throttle body and charge air hose.
|
To fit |
1. |
Remove the seal from the throttle body and delivery hose.
|
3. |
Connect the charge air hose to the pipe. Tighten the hose clamp and the bolt on the cylinder head.
|
4. |
Plug in the pressure/temperature sensor connector.
|
5. |
Attach the bypass valve and tighten the bypass pipe to the turbocharger intake pipe.
Tightening torque 6 Nm (4 lbf ft) |
6. |
Fit the top engine cover
|