Temperature/pressure sensor, intake manifold

/ 9-3 (9400) / 2003 / 2. Engine / PSG 16 (D223L) / Adjustment/replacement / Temperature/pressure sensor, intake manifold

To remove

1.	Remove the engine cover.

2.	Unplug the pressure sensor.

3.	Remove the pressure sensor.

To fit

1.	Clean the sealing surfaces and fit the pressure sensor with a new O-ring. Tightening torque 8 Nm (6 lbf ft)

2.	Plug in the pressure sensor.

3.	Fit the engine cover.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.