P0112, P0113
Read the instructions below then start the fault diagnostic procedure.
Symptom: CHECK ENGINE lamp on.
| P0112, P0113 |
P0112 Intake Air Temperature Sensor Circuit. Short to Ground.
P0113 Intake Air Temperature Sensor Circuit. Short to B+ / Open Circuit.
Fault symptoms
| • |
CHECK ENGINE lamp on.
|
|
Conditions
The following conditions apply for this DTC:| • |
P0112
Signal on control module sensor input more than 4.8 V for more than 0.6 seconds.
|
|
| • |
P0113
Signal on control module sensor input less than 0.19 V for more than 0.6 seconds.
|
|
Diagnostic help
A substitute value of 20°C is used if the temperature sensor is defective.The boost pressure is limited to protect the turbo at high height. The same ground circuit as the boost pressure sensor. The sensor is a combined temperature and pressure sensor.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
