SAAB WIS ONLINE

P0335

Read the instructions below then start the fault diagnostic procedure.

Symptom: CHECK ENGINE lamp on. Limp home.

P0335


Engine Speed Sensor. No Signal During Engine Running.


Fault symptom


CHECK ENGINE lamp on.

Limp home.


Conditions

The following conditions apply for the DTC in question:


The engine speed exceeds 850 rpm.

The period between crankshaft signals is greater than 40 ms 16 times in succession.


Diagnostic help

Diagnosis detects an electrical fault. The control module uses the pump speed x 2 as a substitute value.