SAAB WIS ONLINE

P1636, P1637

Read the instructions below then start the fault diagnostic procedure.

Symptom: CHECK ENGINE lamp on. Car in Limp Home mode

P1636, P1637


P1636 Voltage Supply Group 2. Short to Ground.

P1637 Voltage Supply Group 2. Short to B+.


Fault symptoms


CHECK ENGINE lamp on.

Car in Limp Home mode


Conditions

The following conditions apply for this DTC:


P1636 Power supply to pedal position sensor 2, atmospheric pressure sensor or mass air flow sensor is short-circuited to ground. Output voltage under 4.8 V.

P1637 Power supply to pedal position sensor 2 short-circuited to battery voltage. Output voltage over 5.2 V.


Diagnostic help

The engine speed has a fixed value of 1400 rpm. The car will not react to the accelerator as long as the fault persists. Substitute value for air mass is 1500 mg/comb and atmospheric pressure is 0.7 bar.