P1653

Read the instructions below then start the fault diagnostic procedure.

Symptom: Engine will not start. CHECK ENGINE. Misfiring can occur before trouble code is generated.

P1653

Fault symptoms

•	Engine will not start.

•	CHECK ENGINE.

•	Misfiring can occur before trouble code is generated.

On-Board Diagnostics

Type of diagnosis:

-	Continuous. But interrupted when fault criteria fulfilled and will not restart until next driving cycle.

Enable criteria:

-	Crankshaft rotating. Output active.

Fault criteria:

-	Output voltage exceeding 2V for more than 0.5 s.

Dependents:

-

None.

System reaction to a fault:

-

None.

OK report:

-	Enable criteria fulfilled and fault criteria not fulfilled within 60 s.

Fault handling: (For more information, see .)

-

Type III.

Diagnostic help

Fault diagnosis concerns electrical fault in connecting leads or in the relay.

Functions in the diagnostic tool related to the fault:

•	Activate main relay output.

For more information, see .

Checking the wiring

Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short circuits. Observe the multimeter, diagnostic tool or test lamp during the check.