Horn switch
Horn switch |
|
1. |
Remove the airbag, see Group 8 Body, “SRS, Airbag”.
|
2. |
Remove the four horn plate retaining screws and lift up the whole unit.
|
To fit |
1. |
Fit the old springs to the new horn switch.
|
2. |
Place the horn plate on the horn switch.
|
3. |
Fit the horn plate.
Tightening torque 8±1 Nm (5.86±0.73 lbf ft) |
4. |
Fir the airbag, see Group 8 Body, “SRS, Airbag”.
|