Side direction indicators
| Side direction indicators |
| 1. |
Press the lamp housing forward slightly and release its back edge.
|
|
| 2. |
Pull out the lamp housing.
|
|
| 3. |
Fit the lamp housing, first the front edge and then press in the back edge.
|
|
| Light bulb, side direction indicators |
| 1. |
Press the lamp housing forward slightly and release its back edge.
|
|
| 2. |
Remove and change the bulb.
|
|
| 3. |
Fit the lamp housing, first the front edge and then press in the back edge.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
