Switches in the dashboard
| Switches in the dashboard |
| Note | ||
|
Be careful not to damage the dashboard. |
| 1. |
Extract the switch using two screwdrivers. (Hazard flashers) The switch should be in the active position before extracting it.
|
|
| 2. |
Unplug the connector.
|
|
| To fit |
| 1. |
Replug the connector.
|
|
| 2. |
Push the switch into position.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
