B1235
Read the instructions below then start the fault diagnostic procedure.
Symptom: Luggage compartment lighting not working.
| B1235 |
Luggage compartment lighting
Fault symptoms
Luggage compartment lighting not working.Condition
The output is overload protected and is cut if the load is too high. A DTC is generated if this occurs.DTCs are not generated if the voltage is below 11V or during diagnostic communication.
Diagnostic help
The output from the control module can be activated with the diagnostic tool.Make sure the bulb is the correct rating.
If a lamp with too high a rating is fitted, diagnostic trouble code B1235 can be generated.
The overload protection is reset by turning the ignition OFF and then ON.
| Important | ||
|
The DICE control module can be damaged if a bulb with incorrect rating is fitted. |
||
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
