ABS warning lamp
Read the instructions below then start the fault diagnostic procedure.
Symptom: The ABS warning lamp is inoperative.
| ABS warning lamp |
Fault symptoms
The ABS warning lamp is inoperative.Diagnostic help
The ABS warning lamp can be turned on and off from the ABS control module by means of a diagnostic tool activation command.Check the wiring harness
Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short-circuits in the leads. Observe the multimeter, test lamp or diagnostic tool during the test.This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
