Level sensor
| Level sensor |
| Removal |
| 1. |
Drain the washer fluid reservoir.
|
|
| 2. |
Raise the car and remove the wing liner at the front (3 screws).
|
|
| 3. |
Unplug the connector.
|
|
| 4. |
Pull away the level sensor to remove it from the washer fluid reservoir.
|
|
| Refitting |
| 1. |
Press the level sensor into the washer fluid reservoir with the float hanging down.
|
|
| 2. |
Plug in the connector.
|
|
| 3. |
Refit the wing liner (3 screws).
|
|
| 4. |
Lower the car.
|
|
| 5. |
Fill with washer fluid
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
