B2820
Read the instructions below then start the fault diagnostic procedure.
Symptom: Headlamp wipers do not work.
| B2820 |
Relay, headlamp wipers
Fault symptoms
Headlamp wipers do not work.Circumstances
The control module output is monitored and a DTC generated if there is a:| • |
Open circuit or short to ground.
|
|
| • |
Short circuit to B+.
|
|
DTCs are not generated if the voltage is below 11V or during diagnostic communication.
Diagnostic help
The DICE output can be activated using the diagnostic tool.This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
