Shift-lock electromagnet
Shift-lock electromagnet |
1. |
Remove the selector lever housing, see
.
|
2. |
Cut the cable ties.
|
3. |
Remove the pins for the electromagnet from the connector, pins 5 and 6 in the 6-pin connector and pin 2 in the 2-pin connector.
|
4. |
Drill out the rivets, using a three-millimetre bit.
|
5. |
Separate the upper and lower parts of the selector lever housing slightly at the front and undo the screws on the electromagnet.
|
6. |
Undo the lever on top of the electromagnet and remove the electromagnet.
|
To fit |
1. |
Fit the electromagnet to the lever.
|
2. |
Fit the electromagnet's two screws.
|
3. |
Fit the two parts of the selector lever housing together.
|
4. |
Rivet the parts of the selector lever housing together.
|
5. |
Connect the leads on the electromagnet.
|
6. |
Secure the leads with a cable tie.
|
7. |
Fit the selector lever housing, see
.
|