Indicator lamp TCS OFF
| Indicator lamp TCS OFF |
If a fault should occur in the TC/ABS system, the TCS OFF lamp will be turned on via the P-bus. The warning lamp is also turned on when the system is disengaged manually, which can be done at speeds lower than 60 km/h (37.5 mph) by pressing in the TCS button. The system can be engaged by pressing in the TCS button at any speed, whereby the TCS OFF lamp will come on again.
The lamp lights up when the ignition is switched on. If no fault is detected it goes out after 3-5 seconds.
Diagnostics
A system fault affecting the ABS function will turn on the warning lamps for ABS, brakes and central warning.If the bus message from TC/ABS is absent for 2 seconds, the TCS OFF and ABS lamps will come on. If the bus message is absent for a further 8 seconds the central warning lamp and brake fluid warning lamp will also come on.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
