SAAB WIS ONLINE

Wheel

Wheel

To fit


1. Clean the contact surface between the rim and the brake disc from dirt and rust.

2. Apply 30 06 442 White high-pressure grease paste to the hub.

Important

Make sure there is no grease on the contact surface between the rim and the brake disc.



3. Aluminium rim: Apply oil to the bolt threads and the tapered surface of the bolt.

4. Hang the wheel in place.

Fit the bolts and tighten them alternately by hand to centre the wheel.


5. Tighten the bolts alternately twice.

Important

The wheel must be suspended freely when tightening the wheel bolts.


Tightening torque: 110 Nm (81 lbf ft).