SAAB WIS ONLINE

Cabin temperature sensor

Cabin temperature sensor


Removing


1. Remove the ACC control module, see ACC control module .

2. Press in the buttons beside the cabin temperature sensor and remove the cover over the sensor using your fingers.

3. Carefully release the locking tongues (top and bottom) that holds the sensor in the dashboard. Use a small screwdriver.

4. Remove the sensor by pressing in and unplug the connector.



Fitting



1. Plug in the connector.

2. Fit the cabin temperature sensor.


3. Fit the cover.

4. Put in place the ACC module, see ACC control module .

5. Calibrate the ACC-system by simultaneously pressing the buttons “AUTO” and “OFF”.

Important

All previous diagnostic trouble codes are erased when calibrating. Obtain readouts of stored diagnostic trouble codes before calibrating.