SAAB WIS ONLINE

Adapting door mirror for tall drivers

Adapting door mirror for tall drivers

To remove


1. Remove the mirror glass with a large flat screwdriver.


2. Remove the screws securing the electric motor.

3. LHD cars:

Place 3 washers under the two screws as shown in illustration A .

RHD cars:

Place 1 washer under each screw as shown in illustration B .



To fit


1. LHD cars:

Secure the electric motor by tightening the two bolts with washers. Do not overtighten. Then tighten the last bolt.

RHD cars:

Tighten the bolts.

Tightening torque: 1.5 Nm (1.1 lbf ft)

2. Fit the mirror glass in place.

3. Check the operation of the mirror.