SAAB WIS ONLINE

Windscreen frame sealing, CV

Windscreen frame sealing, CV

To remove


1. Remove the plugs from the windscreen frame seal.


2. Remove the bolts and remove the seal from the windscreen frame.


To fit



1. Start to fit in both corners.

2. Tighten down the seal.

3. Fit the plugs.

4. Pull off the protective backing from the double-sided adhesive tape and start to fit the seal at the bottom of the A-pillar and continue upwards to the corner.

5. Continue fitting from the middle of the windscreen top edge and out towards the edges. Use soapy water to facilitate fitting.

6. Check the fit against the front seal. Adjust the front seal if needed. See