SAAB WIS ONLINE

Auxiliaries drive belt (poly-V-belt)

Auxiliaries drive belt (poly-V-belt)

(in-situ)

To remove


1. Raise the car and remove the front spoiler shield. Disconnect the headlight washer hose and unplug and remove the connector.


2. Free the front part of the right-hand wing liner.

3. Detension the belt tensioner and remove the drive belt. Use a 19 mm wrench.



To fit


1. Detension the belt tensioner and fit the poly-V-belt.


2. Check the position of the belt on all the pulleys.

3. Fit the front part of the right-hand wing liner.

4. Fit the front spoiler shield and fit the headlight washer hose. Fit and plug in the connector.


5. Lower the car. Start the engine and check the function of the belt.